Type IIac (Synthetic), Standard (Modified), X=3.00mm, H<2.0mm


Select Sides * 

sides option

Select Culet Size * 

culet size option

Select Bevel * 

bevel option

SKU: P01042 Categories: ,


Standard design diamond anvils have been shown (c.f. M. Seal, High Temperatures-High Pressures, vol 16, pg. 573 [1984]) to have optimum strength.

Normally, these anvils have a fixed pavilion angle of 38 degrees.  However, in order to accommodate synthetic type IIac, which are limited to a height of < 2 mm, this needs to be modified accordingly.

Therefore, for synthetic type IIac anvils, we can only supply modified standard design anvils if the girdle is larger than approximately 2.7 mm.


Material: synthetic type IIa cvd diamond (also referred to as type IIac)
Modified standard design anvil with girdle X= 3.00 mm and H < 2.0 mm.


Type IIa anvils are required for any Infrared spectroscopy studies, but can also be used for any other applications.


There are no reviews yet.

Be the first to review “Type IIac (Synthetic), Standard (Modified), X=3.00mm, H<2.0mm”